Sync + Output

  1. Power on your wireless mic receiver. 

  2. Secure the power cable on the rear panel

  3. Make note of the antenna type used with the receiver. 

  4. Scan for an open channel.

  5. Power on your matching transmitter microphone. 

  6. Sync the mic to the receiver. 

  7. Note the RF connection. 

  8. Adjust the mic sensitivity (if applicable) for a desirable AF level

  9. Adjust the AF Out level (if applicable) 

  10. Connect the receiver to a speaker, controller, mixer, or similar and test that a clear audio signal comes through and is amplified well.